G05504 Wall mounted garden hose reel

The wall-mounted garden hose reel is used to store hoses, which is efficient and saves time. 

To a certain extent, it has certain advantages for the preservation of hoses and protects the hoses from direct sunlight. 

However, if it is not used properly, many problems will occur with the hose.

How to correctly place the hose in the water truck?

If there is an old hose in your hose reel, first disconnect the hose reel and faucet, and check the hose plug.

Then move the hose reel to a place on the road or lawn, where there will be no drainage problems.

When the hose is fully extended, the water connector on the inner drum can be seen on the inner reel, then unpack the new hose, straighten the hose, and put the rubber or vinyl on the inner threaded end of the new garden hose Insert the washer into the bottom of the hose connector, and screw the female end of the hose to the water connector on the barrel inside the hose reel. Tighten it firmly with slotted pliers, but be careful not to overtighten it to avoid stripping the threads or damaging the parts. The water connector is a plastic part, and it may be damaged if you apply too much force.

Start winding the hose onto the spool of the spool, and try to make the hose feed through the spool with a uniform coil back and forth. Usually, this requires the reel handle to rotate clockwise. When you turn the reel handle with the other hand, it may be helpful to hold the hose with one hand.

Application of Hose Reel